Structure and mechanical properties of poly(l-lactide)/layered silicate nanocomposites

Poly(ε-caprolactone) (PCL) masterbatches with the intercalated and the exfoliated morphology were prepared by ring opening polymerization of ε-caprolactone in the presence of organomodified montmorillonite (MMT) Cloisite 30B. Poly(l-lactide) (PLLA) nanocomposites with Cloisite 30B or PCL masterbatches were prepared by melt blending. The effects of the silicate type, MMT content and the nanocomposite morphology on thermal and mechanical properties of PLLA nanocomposites were examined. The montmorillonite particles in PLLA/Cloisite 30B and PLLA/intercalated masterbatch nanocomposites were intercalated. In contrary to expectations, the exfoliated silicate layers of exfoliated masterbatch were not transferred into the PLLA matrix. Due to a low miscibility of PCL and PLLA, MMT remained in the phase-separated masterbatch domains. The stress-strain characteristics of PLLA nanocomposites, Young modulus E, yield stress σ_y and yield strain ε_y, decreased with increasing MMT concentration, which is associated with the increase in PCL content. The expected stiffening effect of MMT was low due to a low aspect ratio of its particles and was obscured by both plastifying effects of PCL and low PLLA crystallinity. Interestingly, in contrast to the neat PLLA, ductility was enhanced in all PLLA/Cloisite 30B materials and in PLLA/masterbatch nanocomposites with low MMT concentrations.     

Axially Dissymmetric Diphosphines in the Biphenyl Series: Synthesis of (6,6′-Dimethoxybiphenyl-2,2′-diyl)bis(diphenylphosphine)(‘MeO-BIPHEP’) and Analogues via an ortho-Lithiation/Iodination Ullmann-Reaction Approach

The new axially dissymmetric diphosphines (R)- and (S)-(6,6′-dimethoxybiphenyl-2,2′-diyl)bis(diphenyl phosphine) ((R)- and (S)- 5a ; ‘MeO-BIPHEP’) and the analogues (R)- and (S)- 5b and 5c have been synthesized in enantiomerically pure form. These ligands have become readily available by a synthetic scheme which employs, as key steps, an ortho-lithiation/iodination reaction of the (m-methoxyphenyl)diprienylphosphine oxides 8 and a subsequent Ullmann reaction of the resulting iodides 9 to provide the racemic bis(phosphine oxides) 10 . The bis(phosphine oxides) 10 subsequently are resolved with (?)-(2R,3R)- and (+)-(2S,3S)-O-2,3-dibenzoyltartaric acid and reduced to diphosphines 5 . The Ullmann reaction constitutes a new and efficient route to 2,2′-bis(phosphinoyl)-substituted biphenyl systems. Absolute configurations were established for (R)- 5a by X-ray analysis of the derived Pd complex (R,R)- 17a , and for 5b and 5c by means of ¹H-NMR comparisons of the derived Pd complexes 16 or 17 , respectively, and by means of CD comparisons. The MeO-BIPHEP diphosphine 5a proved to be as efficient as the previously described BIPHEMP diphosphine ((6,6′-dimethylbiphenyl-2,2′-diyl)bis(diphenylphosphine)) in enantioselective isomerizations and hydrogenations.     

Theoretical exploration of structure-reactivity relationships in organometallic chemistry: butadiene insertion into the organyltransition-metal bond and conversion of the allyltransition-metal fragment in the [Ni(η-Cp)(η-phenyl)(η-butadiene)] complex

We have theoretically examined the reaction course of the butadiene insertion into the arylNi^II bond in the [Ni^II(η⁵-Cp)(η¹-phenyl)(η²-butadiene)] complex (1), by employing a gradient-corrected DFT method. Critical elementary processes have been scrutinized, viz. monomer insertion, rotational allylic isomerization and allylic η¹-σ→η³-π rearrangement. The first mechanism suggested by Lehmkuhl et al. was refined and supplemented with important details. The critical factors that determine the generation of anti-η³- and syn-η³-allyl isomers of the [Ni^II(η⁵-Cp)(1-benzyl-allyl)] product have been elucidated. This let us to rationalize the experimentally observed, almost exclusive formation of the anti-η³-allyl isomer. Butadiene preferably inserts in η²-mode into the η¹-phenylNi^II bond, initially giving rise to the η¹(C³)-allyl product species, 3σ. The direct formation of the η³-allyl product species, 3π, along the alternative path for η⁴-butadiene insertion, however, is found to be almost entirely disabled kinetically. The thermodynamically favorable η²-trans form of 1 is also shown to be more reactive in accomplishing CC bond formation. Species 3σ is indicated to be a metastable intermediate, occurring in an appreciable stationary concentration. Its respective anti and syn isomeric forms are likely to be in equilibrium, due to the facile rotational isomerization. The subsequent allylic rearrangement into the thermodynamically strongly favorable η³-allylNi^II coordination mode is shown to be the crucial elementary step that discriminates which of the isomeric η³-allyl forms is preferably generated. The higher reactivity of the anti isomer in this process decisively determines the almost exclusive formation of the anti-η³-allyl product species under kinetic control. The requirement of elevated temperatures for the anti-η³-allyl→syn-η³-allyl isomerization to occur, as revealed from experiment, is attributed to the pronounced thermodynamic stability of the η³-allylNi^II coordination.     

Die molekül- und kristallstruktur von thallium-tris(bistrimethylsilylamin), Tl[N(SiMe3)2]3

The molecular and crystal structure of tris(bistrimethylsilylamin)thallium was determined by means of single-crystal X-ray spectroscopy: in the space group P$\text{3}$1c with a = 16.447(7), c = 8.456(7) Å; and D_c = 1.149 g cm^?3 two molecules are located in the unit cell. The compound is isomorphous to the analogues Fe[N(SiMe₃)₂]₃ or Al[N(SiMe₃)₂]₃, respectively, which show a propellar-twist of the Si₂N-groups versus the plane of the metal atom and the three nitrogen-atoms: Tl(N)₃/Si₂N 49.1°; SiNSi 122.6°; NSiC 111.8°; CSiC 107.1°; TlN 2.089 Å;; SiN 1.738 Å;; $\text{SiC}$ 1.889 Å;.     

Structure and Stereochemistry of New Sesquiterpene Esters from Echinacea purpurea (L.) MOENCH. (Preliminary communication)

The structure elucidation of four new constituents from the roots of Echinacea purpurea is described. They are shown to be cinnamoyl esters of sesquiterpene alcohols with a germacrane or a guaiane skeleton. First pharmacological results indicate immunological activities.     

Notiz über einen Zugang zu β, γ-ungesättigten Carbonsäurederivaten mit Hilfe der Amidacetal-Claisenumlagerung. Über synthetische methoden, 17. Mitteilung

Note on a preparation of β, γ-unsaturated carboxylic acid derivatives using the amide acetal Claisen rearrangement 3-(Trimethylsilyl)allyl alcohols smoothly undergo the amide acetal Claisen rearrangement furnishing allyl silanes. Subsequent protolysis with HF at ?20° provides a convenient, stereoselective method for the preparation of β, γ-unsaturated carboxylic acid derivatives. Three model examples illustrate the procedure.     

Zur Kenntnis des Faktors F430 aus methanogenen Bakterien: Struktur des proteinfreien Faktors

Factor F430 from Methanogenic Bacteria: Structure of the Protein-free Factor Factor F430, the porphinoid nickel-containing coenzyme of the methylcoenzyme-M reductase of metanogenic bacteria is shown to be the 3³,8³,12²,13³,18²-pentaacid derivative of the pentamethylester F430M, the structure of which had been determined previously (see structural formulae 1 and 2 ). The structure assignment rests on chromatographic, UV/VIS-, CD-, IR-, and ¹³C-NMR-spectroscopic as well as FAB-mass spectral comparision of F430 with F430M and the pentaacid prepared by acid-catalyzed hydrolysis of F430M. In the cells of Methanobacterium thermoautotrophicum, factor F430 is present in a ‘bound’ and also, depending on the growth conditions, in ‘free’ form, the latter being defined as the part of total F430 that can be extracted from the cells under extremely mild conditions (80% EtOH at 0–4°). From the (protein)-‘bound’ form, F430 is extracted by subsequently treating the cells at 0–4° with 80% EtOH containing (e.g.), 2m LiCi. From both sources, the extracted factor is the same pentaacid, and there is no indication for the existence of a protein-free F430 species that would contain additional (covalently bound) structural elements.     

Nitroxyl radicals and nitroxylethers beyond stabilization: radical generators for efficient polymer modification

Beyond traditional polymer stabilization, sterically hindered piperidine derivatives move into new application areas where radical functions are key elements. Recent achievements in using nitroxyl derivatives in degradation, polymerization and grafting processes are discussed together with the involved chemical reactions and the resulting material properties. The examples shown cover selected nitroxylethers (NORs) performing as flame retardants and flame retardant synergists or replacing peroxides in manufacturing controlled rheology polypropylene (PP). Furthermore, NORs and nitroxyl radicals mediate radical polymerization processes resulting in tailor-made intermediates for polymer modification via radical and condensation steps and offer access to complex polymer architecture. To cite this article: R. Pfaendner, C.R. Chimie 9 (2006).     

Axially Dissymmetric Bis(triaryl)phosphines in the Biphenyl series: Synthesis of (6,6′-dimethylbiphenyl-2,2′-diyl)bis(diphenylphosphine) (‘BIPHEMP’) and analogues,and their use in Rh(I)-catalyzed asymmetric isomerizations of N,N-diethylnerylamine

The axially dissymmetric diphosphines (?)-(R)- and (+)-(S)-(6-6′-dimethylbiphenyl-2,2′-diyl)bis(diphenyl-phosphine) ((?)-(R)- 10 and (+)-(S)- 10 ; ‘BIPHEMP’) have been synthesized, starting from (R)- and (S)-6,6′-dimethylbiphenyl-2,2′-diamine ((R)- and(S)- 16 ), respectively, via Sandmeyer reaction, liathiation, and phosphinylation. Moreover, racemic 4,4′- dimethyl- and 4,4′-bis(dimethylamino)-substituted analogues 11 and 12 respectively, and the 6,6′-bridged analogues 1,11-bis(diphenylphosphino)-5,7-dihydrodibenz[c,e]oxepin (13) were synthesized and resolved into optically pure (R)- and(S)-enantiomers via complexation with di-μ-chlorob is {(R)-2-[1-(dimethylamino)ethyl]pheny-C? N}dipalladium(II) ((R)- 18 ). The molecular structures of the diphosphines (S)- 10 and (R)- 13 and of two derived cationic Rh(I) complexes,[Rh((S)- 10 )(nbd)]BF₄ and [Rh((R)- 13 )(nbd)]BF 4 were determined by x-ray analyses. Absolute configurations were established for (+)-(S)- 10 by X-ray analyses of both the free diphosphine and of the derived Rh(I) complex, and for (?)-(R)- 13 by X-ray analysis of the derived Rh(I) complex. Configurational assignments for the substituted BIPHEMP analogues 11 12 were achieved by means of ¹H-NMR comparisons. The BIPHEMP ligand 10 and analogues 11 , 12 and 13 are the first examples of optically active bis(triaylphosphines) containing the axially dissymmetric biphenyl moiety. All these new diphosphines proved to be excellent asymmetry-inducing ligands in Rh(I)-catalyzed isomerizations of N,N-diethylnerylamine affording citronellat enamine of 98-99% ee.     

The Search for Highly Colored Organic Compounds

Until now the study of organic compounds in which the π-electron system is excited by absorbed light has been mainly concentrated on the ultraviolet and visible regions of the electromagnetic spectrum. Various new applications, such as the use of conjugated organic compounds as dye lasers or as materitals for storing information with the help of diode lasers, led to the synthesis of new compounds which absorb light in the near in infrared (NIR). It is possible to use structure-color relationships to predict the properties of such new compounds when they belong to dyestuff classes which have already been studied in detail; in this case the approach involves decreasing the energy difference between the ground state and the first excited state. A less conventional starting point is provided by molecular structures in which from the outset there is only a very small energy difference between the lowest-energy electronic states; such diradicaloid molecules occupy a special position among the various types of organic compounds. It is possible by means of suitable structural modification to stabilize such molecules in a singlet from which absorbs light at very long wavelengths (i.e. at small wave numbers).